Specifications

MAIN MENU Mode Settings
31
AutoTrim
TM
AutoTrim
TM
is a feature that makes the MENU knob act an individual trim knob for all you analog inputs. When
AutoTrim
TM
is turned on and you adjust a fader the blue LED next to that fader will illuminate indicating the input
associated with that channel will be trimmed when you rotate the MENU knob. When you adjust another fader, the
trim function will move to that input.
Input Configure
IMPORTANT: If the Input Configuration is changed, you NEED to re-boot Nomad
The factory default is set up so that Nomad can handle one pair of AES inputs. If more than one pair of AES inputs are
required or need to use ZaxNet IFB, then the Input configuration must be changed.
The Input Configuration menu is used to select between AES inputs and other Nomad resources. Put simply, for
Nomad’s processors to handle the additional AES channels, other input sources, or ZaxNet, may need to be
deactivated. Fifteen selections are provided to give you various combinations of AES inputs, return 3/4 and analog
input 5/6 and IFB.
INPUT
TYPE
AES
1/2
AES
3/4
AES
5/6
AES
7/8
RETURN
3/4
ANALOG
Input 5/6
IFB
INPUT
0
ON
OFF
OFF
OFF
ON
ON
OFF
1 OFF ON OFF OFF ON ON OFF
2
ÓFF
OFF
ON
OFF
ON
ON
OFF
3
OFF
OFF
OFF
ON
ON
ON
OFF
4 ON ON OFF OFF OFF ON OFF
5 ON OFF ON OFF OFF ON OFF
6 ON OFF OFF ON OFF ON OFF
7
ON
ON
ON
ON
OFF
OFF
OFF
8 OFF OFF OFF OFF ON ON ON
9
OFF
OFF
OFF
OFF
ON
ON
ON
10
OFF
OFF
OFF
OFF
ON
ON
ON
11 OFF OFF OFF ON OFF ON ON
12
ON
OFF
OFF
OFF
OFF
ON
ON
13
ON
OFF
OFF
OFF
OFF
ON
ON
14
ON
OFF
OFF
OFF
OFF
ON
ON
15 OFF ON ON ON OFF OFF ON
Trim Level Indicator Input being controlled
Trim Meter
Displays Input Configuration
Type when you Scroll through
(see chart below)