Specifications

MAIN MENU ENG Setup / Advanced Setup
42
ENG Setup
This menu sets up Nomad’s engineering parameters.
Scroll for additional menu items Scroll for additional menu items
Headphone #2 Volume
Adjusts the level of the headphone output 2.
Set Time & Date page
This sets the date and time for the Nomads internal clock and calendar.
Nomads’ time can be used as time code and date can be used as user-bits.
NOTE: Nomad contains an internal battery that keeps accurate time even if Nomad is powered down for an extended
time. The internal battery should last between two to three years. When replacing the battery you will need a 3 volt
CR2320 coin cell battery.
Compressor Enable
This matrix sets which card tracks, output busses, and if the tape out or mono out will have compressor / limiters
enabled.
Assigns which Card
tracks will be limited
Assigns which Output
Bus will be limited
Tape Out
Mono Out