Specifications

NOMAD OPERATIONS Bus Routing Key

Setting a Crosspoint

Rotate the MENU knob to scroll through the matrix. Stop in the matrix, at the intersection of the input channel and

output channel, where you want to send that specific input. Press the MENU knob to cycle through the available cross

points, which are:

• X – post-fader

• P – pre-fader

• X – post-fader, phase inverted

• P – pre-fader, phase inverted

NOTE: To add the optional phase invert items to the list, while in this matrix press the STAR key. Then by

pressing the MENU knob, you will now be able to cycle through the selections with phase invert.

Power cycling the unit will reset it to NO INVERSION mode but keep your phase invert choice.

Mono Out Matrix

This Matrix sets what audio is routed to the Mono out connector.

Tape/IFB Out

This Matrix sets what audio is routed to the Tape out connector. The Tape out matrix also routes what audio is sent to

the IFB feed. The IFB feed can be received by a Zaxcom ERX receiver.

Card Tracks

Output Busses

Returns

Card Tracks

Output Busses

Returns