Specifications

NOMAD LAYOUT Front Panel

Know Your Nomad

1 2 3 4 5 6 7 8 9 10 11 12

14 15 16 17

1. Primary/Mirror Record LEDs

Indicates the unit is in Record mode and which card is being written to (Primary Card, Mirror Card).

The Mirror LED is intentionally dimmer than the Primary LED

2. TC / REC / 1 / A – multi-function key

• In SHIFTED MODE pressed once, it opens the Timecode Slate page.

• In SHIFTED MODE pressed & held for one second, puts the unit into Record mode.

• When a number is needed in a data entry field, press it for the number/channel 1.

• When an “A” for user-bits is required, double click it.

3. Play LED

Indicates the unit is in Playback mode.

4. A-MIX / Play / 2 / B – multi-function key

• In SHIFTED MODE pressed & held for one second, puts the unit into Playback mode.

• When a number is needed in a data entry field, press it for the number/channel 2.

• When a “B” for user-bits is required, double click it.

• When recording press it to toggle for MP3 marking.

• When Auto-Mix is engaged, and MP3 support is off, pressing will access Auto-Mix menu.

5. STOP LED

Indicates the unit is in Stop mode.

6. ZNET / STOP / 3 /C – multi-function key

• In SHIFTED MODE pressed & held for one second, will Stop Recording or Stop Playback.

• After stopping recording press & hold for one second, opens the False Start page.

• When a number is needed in a data entry field, press it for the number/channel 3.

• When a “C” for user-bits is required, double click it.

7. BUS / 4 / D – multi-function key

• When in the ENG Home Page a single press allows you to adjust the quick pan matrix.

• A second press or a press from any other Home page takes you into the Bus Routing page.

• When a number is needed in a data entry field, press it for the number/channel 4.

• When a “D” for user-bits is required, double click it.

8. PFL / 5 / E – multi-function key

• Pressing from any Home Page put Nomad into pre-fader listen mode.

• When a number is needed in a data entry field, press it for the number/channel 5.

• When an “E” for user-bits is required, double click it

• Pressing from the Meta Data menu or Track Naming menu will open the list of presets.