Specifications

NOMAD OPERATIONS ENG / EFP Bag Operations

AutoTrim

eliminates the need for a separate hardware trim knob for each analog input. AutoTrim

mode can be

enabled in Mode page.

When Auto Trim is enabled and a fader is “touched”, two things come into play:

• The blue LED next to the fader illuminates to indicate that channel is active for AutoTrim

• The MENU knob functions as the input trim for that channel. Turning the MENU knob adjusts the trim level for

that input and indicates it with a trim indicated displayed in the meter.

NOTE: The trim indicator’s position does not relate to a specific value. It is used for relative adjustment only.

Virtual Fader

Nomad has 6 hardware faders and 10 inputs. To mix inputs 7-10 from the ENG Home screen you need to activate

the VFader Mode in the Mode Menu.

Virtual fader will allow you to mix all 10 channels right from the ENG meter screen. And the MENU knob will

become the hardware fader for those inputs.

To Operate:

• Go to the Mode Menu and select “VFader Cycle” and set it for which inputs you want to be able to control.

• In the Mode Menu select “VFader Mode” to choose to be able to adjust Faders only or Faders and Trim

• While in the ENG Home screen, press the MENU knob and the bottom meter on the screen displays which

input you will control with the MENU knob.

• If the Fader Icon is displayed the MENU knob will adjust the mix of that input.

• If the Blue Trim Icon is displayed the MENU knob will control the trim of that input.

• Pressing the MENU knob will cycle through the choices that you have selected.