User manual

MAIN MENU Nomad Lite Recording Routing / Mirror Enables
20
Primary Card Record Routing -
Nomad Lite Only
The primary card record routing in Nomad Lite is slightly different from the card routing in Nomad 10 or 12.
Nomad Lite doesn’t have a record enable matrix or a card routing matrix. With Nomad Lite, you can route all
your inputs and all your record busses to any one of the 10 record tracks. All ISO tracks are recorded pre-fade
only and all output busses are recorded post-fade
In Nomad Lite’s record routing menu you select and highlight which card track you want to record on then
scroll through and choose what source you want to assign and record on that channel. You can choose
between all 10 analog inputs or any of your 6 output busses.
The Record Routing menu is only in Nomad Lite and takes place of the Card Mix Matrix
Mirror Record Enables - Nomad Lite Only
This matrix allows you to select which of the primary tracks are copied on Nomad Lite’s mirror compact flash
card.
It is not necessary to remove record enable cross points from the mirror matrix. If a primary card track is set to
off in the record routing menu nothing will be recorded on the primary card and therefore nothing will be
written to the mirror card. This allows you to leave all of the mirror tracks enabled and it makes it unnecessary
to change the tracks being mirrored every time you change the record routing.
Shows Card Tracks 3 and 4
will Record Output buses 1
and 2
Shows Card Tracks 1 and 2
will Record Inputs 1 and 2
“X” indicates which tracks will
be recorded on the mirror CF
card