User manual

MAIN MENU Nomad 10 / 12 Record Enables
21
Primary Card Record Routing – Nomad 10 and 12
This matrix allows you to select which tracks are enabled and recorded on the primary and mirror compact
flash cards.
It is not necessary to remove record enable cross points from the mirror matrix. If a primary card track is not
enabled nothing will be recorded on the primary card and therefore nothing will be written to the mirror card.
This allows you to leave all of the mirror tracks enabled and it makes it unnecessary to change the tracks being
mirrored every time you change the record routing.
NOTE: If the sample-rate is set to 88.2 kHz or 96 kHz, only eight primary and mirror tracks can be selected
and recorded.
“X” indicates which tracks will be
recorded on the primary and
mirror CF cards