User manual

MAIN MENU Mode Menu
36
Input Configure Set
The Input Configuration menu is used to select between AES inputs and other Nomad resources such as
ZaxNet, returns 3 and 4 and analog input 5 and 6. Put simply, for Nomad’s processors to handle the
additional AES channels, other input sources or ZaxNet may need to be deactivated.
The factory default is set up so that Nomad can handle one pair of AES inputs. If more than one pair of AES
inputs are required or you want to use ZaxNet IFB, then the Input configuration must be changed.
Fifteen selections are provided to give you various combinations of AES inputs, return 3/4 and analog input
5/6 and IFB.
If you are using ZaxNet you must set your input configuration to 8 or higher.
If the Input Configuration is changed, you will need to re-boot Nomad.
INPUT
TYPE
AES
INPUT
1/2
AES
INPUT
3/4
AES
INPUT
5/6
AES
INPUT
7/8
RETURN
3/4
ANALOG
IN 5/6
ZaxNet
ENABLE
0 ON OFF OFF OFF ON ON OFF
1 OFF ON OFF OFF ON ON OFF
2 OFF OFF ON OFF ON ON OFF
3 OFF OFF OFF ON ON ON OFF
4 ON ON OFF OFF OFF ON OFF
5 ON OFF ON OFF OFF ON OFF
6 ON OFF OFF ON OFF ON OFF
7 ON ON ON ON OFF OFF OFF
8 OFF OFF OFF OFF ON ON ON
9 OFF OFF OFF OFF ON ON ON
10 OFF OFF OFF OFF ON ON ON
11 OFF OFF OFF ON OFF ON ON
12 ON OFF OFF OFF OFF ON ON
13 ON OFF OFF OFF OFF ON ON
14 ON OFF OFF OFF OFF ON ON
15 OFF ON ON ON OFF OFF ON
Displays input configuration type
(see chart below)