User manual

NOMAD OPERATIONS ZaxNet Key
63
Pressing the Z-Net Key
ZaxNet transmitter control
Pressing the Z-Net Key will take you into the ZaxNet transmitter control menu. Then if you press one of the
multi-function keys (1 through 8) you will choose which ZaxNet transmitter's parameters you can adjust.
The channel number will represent the unit code on the TRX transmitter that you want to control. So for
example channel 1 will control a TRX transmitter with a unit code set to 1 and channel 2 will control a TRX
with a unit code set to 2.
TRX Frequency
This is where the frequency of the Zaxcom TRX wireless transmitter can be change from. Rotating the
MENU knob will change the frequency. After you stop on a new frequency it will take about 2 seconds for
the TRX to change its frequency to match.
Trim
This is where the input gain of the corresponding Zaxcom TRX wireless transmitter can be change from.
Rotating the MENU knob to the left will decrease the gain. Rotating the Menu knob to the right will
increase the gain.