User manual
NOMAD OPERATIONS Headphone Setup
70
Main Headphone Setup
Nomad has 12 individual headphone matrices available to store user configurable headphone setups. You can
set up each matrix with any combination of the following:
• Card tracks (C)
• Output Buses (OUT)
• Camera Returns (RET)
• ZaxNet Wireless (ZNET) (not available in Nomad Lite)
Please note that you can only choose one ZNET choice per headphone matrix. Each box represents the RX
channel that was setup the ZaxNet set up menu. So for example frequency 1 set up in the ZaxNet setup
menu would be the first box and frequency 2 would be the second box.
To set up your headphone selects
1. To access the headphone setup matrix - simultaneously press MENU knob and headphone knob.
2. While in the matrix, scroll the MENU knob to highlight the cross-point you want to choose.
(L selections are sent to the left ear and R selections are sent to the right ear)
3. Press the MENU knob to put an X in the matrix.
4. Select the E to enable that setup to be active when cycling through this set up as you are listening.
5. Press the headphone knob to advance to the next matrix.
6. To exit, press and hold the headphone knob.
7. You can add a custom name to each setup matrix for easy identification. To add a name go to the monitor
name menu in ENG menu.
To easily monitor your recorded tracks simply set up a matrix and name it PLAY. Then when you press play from
Nomad this matrix will automatically be routed to your main headphones so you can monitor your recorded
tracks. Then when you press stop Nomad will automatically jump to the matrix that was being monitored.
Headphone matrix setup to decode MS stereo
The following is the proper setting for M-S headphone decoding. This example uses card track 1 as the Mid and
card track 2 as the Side:
To add the optional phase invert - press the STAR key when in the headphone setup matrix. Then by pressing the
MENU knob, you will be able to select phase invert. Phase invert will be shown with an X and a line above it.
The “E” enable box to include this monitor
configuration while cycling through the HP selections.
ZNET allows you to
monitor ZaxNet
frequencies directly
Left Ear
Right Ear