User manual

NOMAD OPERATIONS Basic ENG / EFP Bag Operations

AutoTrim

AutoTrim eliminates the need for a separate hardware trim knob for each analog input. AutoTrim

mode can be

enabled in Mode page.

When AutoTrim is enabled and a fader is “touched”, two things come into play:

• The blue LED next to the fader illuminates to indicate that channel is active for AutoTrim.

• The MENU knob functions as the input trim for that channel. Turning the MENU Knob adjusts the trim level

for that input and indicates it with a trim indicated displayed in the meter.

The trim indicator’s position does not relate to a specific value. It is used for relative adjustment only.

AutoPan

AutoPan is a feature that causes the COM key act as a pan knob. When AutoPan is turned on in the mode menu

and you adjust a fader the blue LED next to that fader will illuminate indicating the input routed to that fader

will be panned when the COM key is pressed. AutoPan is active from any meter screen.

When pressing the COM key the panning for the illuminated channel will cycle from left to center to right to

blank - unless “Prevent Empty Pan” is turned ON then the blank option will not be cycled through.

As you pan with AutoPan the headphone display will temporally show which input is panned to which position.

Analog input 1 panned Left, Center, Right

Virtual Fader

Nomad has 6 hardware faders and 10 inputs. To mix inputs 7-10 from the ENG home screen you need to

activate the VFader mode in the mode menu. The virtual fader will allow you to mix all 10 channels right from

the ENG meter screen using the MENU Knob as the hardware fader for those inputs.

Operating virtual faders

• Go to the mode menu and select “VFader Cycle” and set it for which inputs you want to be able to control.

• In the mode menu select “VFader Mode” to choose if you will be to be adjusting faders only or faders and

trim.

• While in the ENG home screen, press the MENU Knob then the bottom meter on the screen displays which

input you will control with the MENU Knob.

• If the fader icon is displayed the MENU Knob will adjust the mix of that input.

• If the blue trim icon is displayed the MENU Knob will control the trim of that input.

• Pressing the MENU Knob will cycle through the inputs you have chosen and the selected modes that you

have selected.