Specifications

Zaxcom ZFR 200 / 300 Manual___________________ _______ Main Menu

Format Recording Card

This page will allow you to erase and format the micro SD card.

NOTE: This page will only appear if a card was inserted prior to booting up the ZFR. Also if the card

is removed this page will not appear.

To Format a Card:

1. Before formatting the card, you may want to name the ZFR. Naming the card makes it easier to

differentiate files from different recorders for example you name the card with the talents name.

2. With the power ‘OFF’, insert the memory card into the media slot with the label to the back of the

unit. Press it all the way in till it “clicks”.

3. Power up the ZFR

4. Press the MENU key 7 times until the screen displays “PRESS UP KEY 5X TO ERASE CARD”.

5. Press the INC key 5 times.

6. You will see “FORMATTING FAT 32”

7. The ZFR will displays “SUCCESS” or “FORMAT FAILED ERROR”

8. If “SUCCESS” appears you can power cycle the ZFR and you are good to go.

Time Left / Used

This page displays the remaining time left on the card and the time already recorded on the card.

NOTE: If you see a “FORMAT FAILED ERROR” try re-formatting the card and if it fails again do not

use that card in the ZFR.

NOTE: Even though many cards are sold preformatted, you must reformat it in the ZFR prior to

recording. Only cards formatted in the unit will work properly.

PRESS UP KEY 5X

TO ERASE CARD

TIME LEFT 20H

TIME USED 4H