Specifications

Zaxcom ZFR 200 / 300 Manual____ _______________ ___ ___Extended Menu
15
Time Code Jam Mode
TC JAM MODE:
AUTO-JAM
This menu sets how the ZFR jams timecode.
• MANUAL (OFF) –This setting is not used in the ZFR
• AUTO-JAM – continuously jams timecode.
• AUTO-LOAD – The ZFR will start and stop the recording, when the ZFR receives record run
timecode it will go into record and when the timecode stops the ZFR will stop recording.
Time Code Source
TC SOURCE:
IFB (RF)
This menu selects how the ZFR will receive timecode.ers:
• IFB (RF)– The ZFR will receive timecode via ZaxNet being broadcast from either Nomad, an
IFB100/200, a TRX transmitter or another ZFR recorder
• AUDIO INPUT– The ZFR, with a proper cable, will receive timecode via the microphone input.
Group ID
REMOTE CONTROL
GROUP ID=1
This allows you to set your ZFR to a “GROUP” to be controlled. For example a transmitter set to Group
1 will control all Group 1 receivers and a Group 2 transmitter will control all Group 2 receivers. This
allows you to control a group of receivers without affecting others. This will also help if two or more
people on set are sending ZaxNet commands each person will be independent and won’t interfere
with each other
Group codes can be set from 1 to 99
Unit ID
REMOTE CONTROL
UNIT ID=001
This assigns a unique number identify the ZFR unit within a particular group. This way individual ZFR’s
in one group can be independently controlled.
You can assign a number from 1 to 200 or if setting it a maser it can be set it to ALL.
TC JAM MODE
AUTO-JAM
TC SOURCE
IFB (RF)
REMOTE CONTROL
GROUP ID=1
REMOTE CONTROL
UNIT ID=001