Specifications

Zaxcom ZFR 200 / 300 Manual____ _______________ ___ ___Extended Menu

Battery Type

This menu adjusts the ZFR’s battery type to display the remaining battery capacity.

The settings are NIMH, Lithium and Alkaline.

Recording Mode page

This adjusts what the ZFR will do after you reach the record capacity of the card.

• NON-LOOP RECORD - Once the card has filled up, recording will stop and FULL will be displayed.

This prevents over-writing any portion of the audio.

• LOOP RECORD - Once the media has filled up, the new audio will begin over-writing the oldest

audio on the card.

IFB Remote Control - this menu will not appear if the IFB settings allow the ZFR to go into transmit mode.

This menu turns ON / OFF if the ZFR will accept remote control commands via ZaxNet.

IFB Jam Threshold

IFB JAM THRESH

1000 MS(DEFAULT)

This menu sets the amount of time the timecode has to jump before a new file is forcibly created.

IMPORTANT: When a new file is created, while a take is in progress, about 1/2 second of the audio

will be lost.

NOTE: In the menu you will see “ENG” and “QRX” options for these battery types as well. This is

for cross compatibility with our wireless transmitters and how the battery level is received by

the wireless receivers. You can ignore these settings when using the ZFR.

BATTERY TYPE:

NIMH

RECORD MODE:

LOOP RECORD

IFB JAM THRESH

1000 MS (DEFAUT)

ALLOW IFB REMOTE

CONTROL: ON