Specifications

Zaxcom ZFR 200 / 300 Manual____ _______________ ___ ___Extended Menu
20
Encryption Menu
ENCRYPTION MENU:
HIDDEN
This hides the Encryption Menu.
• HIDDEN the encryption menu doesn’t appear when you cycle through the menu settings.
• ON the Encryption will appear.
Encryption Code page
ID1:000 ID0:000
If you set an encryption code the transmitted audio will be encrypted and can only be
listened to if the receiver has the matching encryption code entered. When an ERX receives
an audio signal and the codes do not match, all that will be heard is white-noise.
These two sets of numbers are formed into a single six-digit encryption code which
provides a total of 16,777,216 possible combinations.
To adjust the encryption code
1. Momentarily press the MENU key to advance to the next character.
2. To change the designated character, press the INC or DEC key.
3. To exit this page, press and hold the MENU key for 1 second.
NOTE: Both of these codes should always be set to 000 for normal un-encrypted operation.
ENCRYPTION MENU:
HIDDEN
ID1:000 ID0:000