Specifications

Zaxcom ZFR 200 / 300 Manual___________________ _________________Overview
5
1. Power Switch
2. Card Slot
This slot holds the micro SD card. To insert a card, with the ZFR screen facing you, turn the
card so the finger contacts are facing you and down toward the slot. Insert the card into
the slot and press it down until you here a slight click. To remove it, press it in until you
hear the same click again.
3. Microphone / Input Connector
4. LCD Display
5. Card Key
6. INC / Record Key
• Increases the parameters of the menu items
• Press it with the Card key will put the ZFR into record
• Press it when the ZFR is stopped will play back
• Press it while playing back will fast forward
7. DEC / Stop Key
• Decreases the parameters of the menu items
• Press it with the Card key will stop recording
• Press it while stopped will cause the ZFR to jump back one segment
• Press it while playing back will stop play back
• Holding it while playing back will take you to the start of that segment
8. Menu / Play Key
• Press it will access the Menu
• Press it again will take you to additional Menu items
• Pressing it while powering up will take you into the Extended Menu
• Press it with the Card Key will Playback a segment
9. Battery Compartment