Specifications

Zaxcom ZFR 200 / 300 Manual___________________ _______ Main Menu
8
Timecode Frame-rate
This menu sets the Timecode frame-rate that will be recorded.
The ZFR will lock to and record all standard Timecode frame rates.
• 23.98, 24, 25, 29.97DF, 29.97DF, 30 DF, 30 NDF
Timecode Jam Mode
This menu sets how the ZFR jams Timecode.
MANUAL (OFF) –This setting is not used in the ZFR
AUTO-JAM – Continuously jams timecode.
AUTO-LOAD – The ZFR will start and stop the recording, when the ZFR receives record run Timecode
it will go into record and when the Timecode stops the ZFR will stop recording.
Timecode Source
This menu sets where the ZFR will receive its Timecode from.
• IFB (RF) – Receives Timecode wirelessly via ZaxNet
• AUDIO INPUT – Receives Timecode from a source connected to the Audio Input (microphone
connector)
TIMECODE 23.98
GEN 01:02:34:01
TC JAM MODE:
AUTO-JAM
TC SOURCE:
IFB (RF)