User manual

Zaxcom ZFR 200 / 300 Extended Menu

Group ID Set

Group ID lets you set your ZFR to a “GROUP” that will be controlled via ZaxNet.

So for example a ZFR set to Group 1 will be controlled by a ZaxNet transmitter set to Group 1 and a Group

2 ZFR will be controlled by a Group 2 ZaxNet transmitter. This allows a group of recorders to be

controlled without affecting others. This will also help if two or more people on set are sending ZaxNet

commands each person will be independent and won’t interfere with each other. Most users leave this

set to 1 on all of their Zaxcom products. Group codes can be set from 1 to 99.

Unit ID Set

The unit code assigns a unique number identify the ZFR within a particular group. This allows individual

ZFR’s in the same group to be independently controlled. So for example if you want to control the gain

for each ZFR you would set the unit id on each ZFR separately. Unit codes can be set to ALL or be assigned

any number from 1 to 200.

REMOTE CONTROL

GROUP ID = 1

REMOTE CONTROL

UNIT CODE=ALL