User manual

Zaxcom ZFR 200 / 300 Extended Menu

Automatic Record After Boot up

Record after boot-up will let you set the ZFR to automatically go into record after the unit boots up.

• ON - The ZFR will automatically start to record after it boots up.

• OFF - The ZFR will wait for a ZaxNet command or a manual record trigger to start recording.

ZFR Name Set

This menu allows you to change the name of the ZFR from the default name - which is the unit’s serial

number. The name entered into the unit becomes part of the name of the audio files generated by the

unit and is also included in the metadata of the BWF file. Naming the unit aids in identifying the files from

several different wireless.

The maximum Name length is 8 characters. You can select any letter or number and can even use

spaces.

To set/change the transmitter name:

1. Press the INC or DEC key to change the character in the current position.

2. Press the MENU key to proceed to the next character.

3. When finished, press and hold the MENU key to set the name or you can cycle the power.

Hide Encryption Menu

This allows you to hide the encryption menu.

• HIDDEN the encryption menu doesn’t appear when you cycle through the menu settings.

• ON the encryption menu will appear.

NAME: SN1234

ENCRYPTION MENU:

HIDDEN

RECORD ON BOOTUP