Manualshelf

User manual

ManualsBrandsZaxcom ManualsMusical equipmentZFR200
19202122232425262728
Zaxcom ZFR 200 / 300 Manual Wiring Diagrams
24
Inputting Audio
The ZFR use an unbalanced microphone input via a 3-pin micro-LEMO connector. You can use an
unbalanced dynamic microphone or a powered lavaliere.
You can also use a line-level input though an inline pad will be required.
Recommended Microphones
While any 3.3 volt microphone will work with the ZFR, Zaxcom recommends the following microphones:
Countryman EMW, B3, B6, Sanken COS-11D, DPA 4063
Wiring Diagrams
The following 3-pin micro-LEMO connectors mate with the microphone connector:
• FGB.00.303.CLAD.22 – LEMO with a pull release.
• FVB.00.303.NLA – LEMO with a twist release.
Regardless of the connector used it is recommended that the ground gets attached to the shell of the LEMO
connector.
Two Wire Microphone Configuration
Three Wire Microphone Configuration
Please contact your microphone manufaturer.
Stereo Microphone Configuration