User manual

Zaxcom ZFR 200 / 300 Manual Recorder Layout

1. Power switch

2. Micro SD media slot

To insert a Micro SD card, start with the screen of the ZFR facing you, turn the card so the finger contacts

are facing you and pointing down towards the slot. Insert the card into the slot and press it down until you

here a slight click. To remove the card, press the card in until you hear the same click again.

3. Microphone / Time Code input connector (3 pin Lemo)

4. LCD display

5. Card key

6. INC / Record key

• Pressing the key while in a menu page will increase the parameters of that menu item.

• While in the home screen press the key simultaneously with the card key to put the ZFR into record.

• Press the key when the ZFR is stopped and the ZFR will play back the last file.

• Press the key while playing back will fast forward the playback.

• While in stop mode press and hold the key will cause the ZFR to advance to the next segment.

7. DEC / Stop Key

• Pressing the key while in a menu page will decrease the parameters of that menu item.

• While in the home screen press the key simultaneously with the card key to stop recording.

• Press it while playing back will stop play back.

• While in stop mode press and hold the key will cause the ZFR to jump back to the previous segment.

8. Menu / Play Key

• Press the key to access the main menu.

• Pressing the key again will take you to additional menu items.

• Holding the key while powering up will take you into the extended menu.

• Press the menu key simultaneously with the card key will playback a segment.

9. Battery compartment

ZFR200 will use 1 AA battery and the ZFR300 will use 2 AA batteries. The ZFR can use alkaline, Lithium or

NiMH batteries.