Manualshelf

User manual

ManualsBrandsZaxcom ManualsMusical equipmentZFR200
12345678910
Zaxcom ZFR 200 / 300 Manual Main Menu
8
Main Menu
Navigating the Main Menu
• Press the MENU key to enter the menu.
• To advance to the next menu press the MENU key again.
Exiting the Main Menu
• To exit the menu at any time press and hold the MENU key for 1.5 seconds
Microphone Gain Adjust
The microphone gain is adjusted from this menu. This page displays the gain setting in decibels and a meter
that indicates the audio signal. The meter is displayed horizontally from left to right.
If the ZFR is a stereo unit, and it is set to stereo mode, two meters will be displayed - one for each channel.
Please note the gain while in stereo mode is applied to both sources.
High Pass Filter
The high pass filter is turned on and adjusted from this menu.
• The high pass filter range is 70Hz to 220Hz and can be adjusted in 10Hz increments.
Time Code Frame Rate Set
This menu is where the time code frame rate is set.
The ZFR will lock to, and record all standard time code frame rates.
• 23.98, 24, 25, 29.97DF, 29.97DF, 30 DF, 30 NDF
GEN 01:02:34:01