User's Manual

Wireless Extenders

YX500-CEL Installation Guide

Figure 6 - Attach Mounting Bracket

3) Mount the Signal Antenna to the mounting bracket, making sure that the

antenna is perpendicular to the floor before securing it to the bracket.

Figure 7 - Secure Signal Antenna to bracket

Note:

If you need to adjust the Signal Antenna after securing it to the

bracket, insert a small flat-head screwdriver on each side of the

bracket bridge. Pushing down on the bridge grips will allow you

to slide the bridge off each tab.

4) Unroll the RG6 coaxial cable that came with the YX500-CEL kit, straighten it,

and then attach it to the Signal Antenna.