User's Manual

Wireless Extenders
11
YX500-CEL Installation Guide
height of the cell phone when it is typically in use (avoid placing the Base Unit
on the floor).
For the best results, avoid placing the Base Unit antenna within 2 feet of other
wires or metal objects.
Placing the Base Unit on a Furniture Piece
The Base Unit is designed so that it easily sits on top of a furniture piece using
the following steps.
1) Attach the coaxial cable, which should already be attached to the Signal
Antenna, to the Base Unit.
Figure 10 - Base Unit with Power Cord and Cable Connectors
2) Attach the antenna to the Base Unit and position it so that it is at a 90
degrees angle to the Base Unit.
3) Set the Base Unit on a furniture piece.
4) Attach the power supply to the Base Unit and plug the power supply into an
outlet. See the Troubleshooting section if a Red light lights up.
Note: If you are unable to position the Base Unit so that the Power light
shines a steady green, you may have to move the Base Unit to
another location in the room, or mount it on a wall. See the
Troubleshooting section for more information.