WWW.WPSANTENNAS.COM 1-877-594-5766 DMAN-0023-Rev A 30-day money back guarantee and 2-year manufacturer warranty Register your zBoost product at www.Wi-Ex.
| P a g e ZBOOST® YX520 (INTERNATIONAL) USER GUIDE Changes or modifications not expressly approved by Wi-Ex could void the user’s authority to operate this equipment and/or void the product warranty.
| P a g e ZBOOST® YX520 (INTERNATIONAL) USER GUIDE Changes or modifications not expressly approved by Wi-Ex could void the user’s authority to operate this equipment and/or void the product warranty.
| P a g e ZBOOST® YX520 (INTERNATIONAL) USER GUIDE System is receiving signals from either the mobile phone or the cell tower, which are too strong for proper operation. This may be due to improper setup or operation. The Base Unit is disabled. Remove power for 10 seconds and reconnect power to reset system. If the condition persists, contact Wi-Ex Customer Support for additional information on setup. Base Unit is disabled. Call Wi-Ex Customer Support.
| P a g e ZBOOST® YX520 (INTERNATIONAL) USER GUIDE System is receiving signals from either the mobile phone or the cell tower, which are too strong for proper operation. This may be due to improper setup or operation. The Base Unit is disabled. Remove power for 10 seconds and reconnect power to reset system. If the condition persists, contact Wi-Ex Customer Support for additional information on setup. Base Unit is disabled. Call Wi-Ex Customer Support.
| P a g e Optional zBoost® Accessories ZBOOST® YX520 (INTERNATIONAL) USER GUIDE X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X YX510-Dual Band X YX500-CEL X YX500-PCS Description X YX030-08W YX031-10W X YX030-15W X YX030-35W X YX050-PCS-CEL X YX069-DCS-GS9 YX029-PCS-CEL X YX027-PCS-CEL YX026-CEL YX025-CEL 8” white window entry flat cable 10 ft.
| P a g e Optional zBoost® Accessories ZBOOST® YX520 (INTERNATIONAL) USER GUIDE X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X YX510-Dual Band X YX500-CEL X YX500-PCS Description X YX030-08W YX031-10W X YX030-15W X YX030-35W X YX050-PCS-CEL X YX029-DCS-GS9 YX069-PCS-CEL X YX027-PCS-CEL YX026-CEL YX025-CEL 8” white window entry flat cable 10 ft.
| P a g e ZBOOST® YX520 (INTERNATIONAL) USER GUIDE FIGURE 2: Mobile Phone Signal Obstructions Mobile phone signals can be completely blocked or reflected by buildings, walls, trees, hills and other terrain features resulting in low signal strength.
| P a g e ZBOOST® YX520 (INTERNATIONAL) USER GUIDE FIGURE 2: Mobile Phone Signal Obstructions Mobile phone signals can be completely blocked or reflected by buildings, walls, trees, hills and other terrain features resulting in low signal strength.
| P a g e ZBOOST® YX520 (INTERNATIONAL) USER GUIDE When connecting the cable to the aerial, run the cable straight down from the aerial. Avoid draping the coax near the aerial. Avoid placing the Signal Aerial near metal such as wiring, A/C ducts, metal siding, truss plates, etc. Warning The location of the Signal Aerial should be at least 5 meters higher than the Base Unit Aerial. If this is not possible, maximizing the horizontal separation between the two aerials is advised.
| P a g e ZBOOST® YX520 (INTERNATIONAL) USER GUIDE When connecting the cable to the aerial, run the cable straight down from the aerial. Avoid draping the coax near the aerial. Avoid placing the Signal Aerial near metal such as wiring, A/C ducts, metal siding, truss plates, etc. Warning The location of the Signal Aerial should be at least 5 meters higher than the Base Unit Aerial. If this is not possible, maximizing the horizontal separation between the two aerials is advised.
➋ BETTER PERFORMANCE: Outside of a window 6. Attach the Base Unit Aerial to the Base Unit and position it vertically. 5. Connect the other end of the coaxial cable to the Base Unit. 4. Attach the coaxial cable to the Signal Aerial.
➋ BETTER PERFORMANCE: Outside of a window 6. Attach the Base Unit Aerial to the Base Unit and position it vertically. 5. Connect the other end of the coaxial cable to the Base Unit. 4. Attach the coaxial cable to the Signal Aerial.
ZBOOST® YX520 (INTERNATIONAL) USER GUIDE Best Performance: Place the Signal Aerial in attic or on roof 8. Choose the appropriate power supply option for your location, connect the Power Supply to the Base Unit and plug into a power outlet. 7. Connect the Base Unit Aerial to the Base Unit and position it vertically. 6. From the other end, connect the coax cable it to the Base Unit. 5.
ZBOOST® YX520 (INTERNATIONAL) USER GUIDE Best Performance: Place the Signal Aerial in attic or on roof 8. Choose the appropriate power supply option for your location, connect the Power Supply to the Base Unit and plug into a power outlet. 7. Connect the Base Unit Aerial to the Base Unit and position it vertically. 6. From the other end, connect the coax cable it to the Base Unit. 5.
| P a g e ZBOOST® YX520 (INTERNATIONAL) USER GUIDE Plug the power cable into the Base Unit. Hold your mobile phone about 2 meters from the Base Unit and then turn it on. Wait up to 1 minute for the mobile phone to register the signal coming from the Base Unit. If the number of bars shows improvement, your zBoost® unit is working properly. 3. 4. 5. The Base Unit can also be easily mounted to a wall using the included mounting bracket hardware.
| P a g e ZBOOST® YX520 (INTERNATIONAL) USER GUIDE Plug the power cable into the Base Unit. Hold your mobile phone about 2 meters from the Base Unit and then turn it on. Wait up to 1 minute for the mobile phone to register the signal coming from the Base Unit. If the number of bars shows improvement, your zBoost® unit is working properly. 3. 4. 5. The Base Unit can also be easily mounted to a wall using the included mounting bracket hardware.
| P a g e Troubleshooting Your zBoost® System ZBOOST® YX520 (INTERNATIONAL) USER GUIDE System is receiving signals from either the mobile phone or the cell tower, which are too strong for proper operation. This may be due to improper setup or operation. The Base Unit is disabled. Remove power for 10 seconds and reconnect power to reset system. If the condition persists, contact Wi-Ex Customer Support for additional information on setup. Base Unit is disabled. Call Wi-Ex Customer Support.
| P a g e Troubleshooting Your zBoost® System ZBOOST® YX520 (INTERNATIONAL) USER GUIDE System is receiving signals from either the mobile phone or the cell tower, which are too strong for proper operation. This may be due to improper setup or operation. The Base Unit is disabled. Remove power for 10 seconds and reconnect power to reset system. If the condition persists, contact Wi-Ex Customer Support for additional information on setup. Base Unit is disabled. Call Wi-Ex Customer Support.
| P a g e For more FAQ’s, visit our website: www.Wi-Ex.com Frequently Asked Questions ZBOOST® YX520 (INTERNATIONAL) USER GUIDE You may not observe that gain on your signal meter because of the signal spreading out from the aerial.
| P a g e For more FAQ’s, visit our website: www.Wi-Ex.com Frequently Asked Questions ZBOOST® YX520 (INTERNATIONAL) USER GUIDE You may not observe that gain on your signal meter because of the signal spreading out from the aerial.
| P a g e Limited 2 Year Warranty Register your product at www.Wi-Ex .com zBoost® Warranty Information ZBOOST® YX520 (INTERNATIONAL) USER GUIDE Record the model and serial number found on the product below: • • • • • Labor charges for set up of the unit. Product replacement because of misuse, accident, lightning damage, unauthorized repair or other cause not within the control of Wi-Ex®. Incidental or consequential damages resulting from the product.
| P a g e Limited 2 Year Warranty Register your product at www.Wi-Ex .com zBoost® Warranty Information ZBOOST® YX520 (INTERNATIONAL) USER GUIDE Record the model and serial number found on the product below: • • • • • Labor charges for set up of the unit. Product replacement because of misuse, accident, lightning damage, unauthorized repair or other cause not within the control of Wi-Ex®. Incidental or consequential damages resulting from the product.
