Product Specs

11
Kepler FX6 Facial Recognition Device — Product Specifications
2.4 Connector Description
2.4.1 Power Connector
of the tail wire at the rear of the device is the power input connector. The details
are as follows:
Table 2- 3 Power connector
Signal
Direction
Function
12 V
Inward positive
12 V±20% DC input
GND
Outward negative
Power ground
Reverse polarity protection and surge protection are provided for the device's internal power input.
2.4.2 Relay Output
The alarm output is a passive relay boolean output. The contact voltage capacity is 220 V DC, 250
V AC. The contact current capacity is 1 A. The power capacity is 30 W.
2.4.3 WG Output
This connector is used to output recognition results and connect other WG input devices such as
access control boards.
2.4.4 Ethernet Connector
The RJ45/LAN connector of the tail wire at the rear of the device is the camera's Ethernet
connector, used to transmit camera control commands and captured images.
2.4.5 USB
The USB connector is used to connect a USB device such as an ID card reader.