Data Sheet

ManualsBrandsZDAuto ManualsDevelopment Kits & EducationI/O module AOV03010D3A

M5S modular I/O components

Modular components with integrated circuits aiming at versatile operation in

industrial systems like regulators or programmable logic controllers.

Connection of electronics and industrial control

The modules are a connecting element between electronics on one side as well as

the world of industrial control on the other side. The modules are completely sealed,

water proof, fire proof and dust proof.

Universal wiring diagram for full flexibility

A universal wiring diagram allows all M5S I/O modules to be interchangeable without the need to change the internal

or external wiring. By plugging different modules, customer specific input/output configurations can be achieved as

well as the addition of functions to already rolled-out devices.

Overview (Standard modules are underlined)

Digital input - „BI“/“PI“ Switches, voltage detection BID0324A1, BID0524A1, BID0324B1,

BID0524B1, BIA0324B5, BIA0524B5,

BIA03110B5, BIA05110B5, BIA03220B5,

BIA05220B5

Pulses up to 200 kHz PID0324A2, PID0524A2,

PID0324B2, PID0524B2

Digital output - „BO“/“PO“ DC switch output BOT03750C1b, BOT05750C1b,

BOT03750D1b, BOT05750D1b,

BOT0315E1b, BOT0515E1b,

BOT0315F1b, BOT0515F1b

AC switch output BOS03800E2b, BOS05800E2b

Pulses up to 200 kHz POT0315C2b, POT0515C2b,

POT0315D2b, POT0515D2b

Analogue input - „AI“ 20 mA analogue signal AIA03020A3, AIA05020A3,

AIA03020B3, AIA05020B3,

AIA03020C4, AIA05020C4

10 Volt analogue signal AIV03010A3, AIV05010A3,

AIV03010B3, AIV05010B3,

AIV03010C4, AIV05010C4

Temperature sensors type

N, type J, type K, Pt100

AIN03120A3, AIN05120A3, AIJ03600A3,

AIJ05600A3, AIK031200A3, AIK051200A3,

AIP03600A3, AIP05600A3

Analogue output - „AO“ 20 mA analogue signal AOA03020C3, AOA05020C3,

AOA03020D3Ab, AOA05020D3Ab

10 Volt analogue signal AOV03010C3, AOV05010C3,

AOV03010D3Ab, AOV05010D3Ab

Rev-2019-08 Page 1 of 20 www.tde-instruments.de

Summary of content (20 pages)

PAGE 1
M5S modular I/O components Modular components with integrated circuits aiming at versatile operation in industrial systems like regulators or programmable logic controllers. Connection of electronics and industrial control The modules are a connecting element between electronics on one side as well as the world of industrial control on the other side. The modules are completely sealed, water proof, fire proof and dust proof.
PAGE 2
Table of contents M5S digital input - „BI“/“PI“............................................................................................................................................... 3 M5S digital output - „BO“/“PO“......................................................................................................................................... 4 M5S analogue input - „AI“............................................................................................................................
PAGE 3
M5S digital input - „BI“/“PI“ • For detection of switch states, pulses or encoder signals • Galvanic isolation through optocouples • Open collector output M5S-BID0324A1, M5S-BID0524A1 Description Internal circuit DC optocouple binary input Version Signal Voltage/current Isolation Signal BID03 0-5 kHz 3.
PAGE 4
M5S digital output - „BO“/“PO“ • For control of relays, lamps, buzzers or other signaling devices • Relay, solid state relay, or transistor output • Galvanic isolation M5S-BOT03750C1b, M5S-BOT05750C1b Description Internal circuit Optocouple with transistor output External circuit Version Signal Voltage/current Isolation Signal Voltage/current BOT03 0-5 kHz 3.
PAGE 5
M5S-BOS03800E2b, M5S-BOS05800E2b Description Internal circuit Optocouple with SSR output External circuit Version Signal Voltage/current Isolation Signal Voltage/current BOS03 0-100 Hz 3.3 V/5 mA DC Yes 50-60 Hz, AC 20-250 V/800 mA AC BOS05 0-100 Hz 5 V/5 mA DC 2 3 + EXT-S EXT− 4 5 U − UINT 5V Rev-2019-08 6 Signal → 7 8 U max.
PAGE 6
M5S analogue input - „AI“ • For measurement of analogue signals, potentiometers, temperature sensors as well as other current or voltage sources • Optional: isolated or non-isolated signal • Multi function: DC Voltage/current as well as different types of temperature sensors M5S-AIV03010B3, M5S-AIV05010B3 Internal circuit Version Signal Supply AIV03 0-3.3 V DC 3.3 V/10 mA DC Yes AIV05 0-5 V DC 5 V/10 mA DC + − V − + U 1 UEXT 18-30 V 2 3 4 5 6 + − V U UINT 3.
PAGE 7
M5S-AIV03010C4, M5S-AIV05010C4 Description Internal circuit Analogue input voltage isolated, 1-Wire External circuit Version Signal Supply Isolation AIV03 3.3 V 1-Wire serial interface 3.
PAGE 8
M5S-AIP03600A3, M5S-AIP05600A3 Internal circuit Version Signal Supply AIP03 0-3.3 V DC 3.3 V/10 mA DC No AIP05 0-5 V DC 5 V/10 mA DC 0V V 3 4 5 + − U UINT 3.
PAGE 9
M5S analogue output - „AO“ • For the control of speed regulators, heating regulators or other voltage/current measuring devices. • Optional: isolated or non-isolated signal • Analogue signals: 10 V, 20 mA M5S-AOV03010D3Ab, M5S-AOV05010D3Ab Description Internal circuit Analogue output voltage isolated External circuit Version Signal Supply Isolation AOV03 1-10 kHz PWM Active low 3.
PAGE 10
Signal description Signal Name Description INT-S Internal signal Internal connection to the microcontroller, can be used as GPIO (BI, PI, BO, PO modules) or PWM (AO modules). If supported by the microcontroller, also analogue signals (ADC or DAC) (AI, AO modules) or 1-wire serial interface (AI modules), for microcontrollers that do not have ADC functions. INT+ Internal positive supply Internal power supply from the microcontroller, e.g. 3.
PAGE 11
Evaluation boards for Arduino and Raspberry Pi Using the evaluation boards, the functionality of M5S I/O modules can be explored easily. The M5S I/O modules allow switching of external circuits and input of external circuits with higher voltages than directly allowed on the Arduino/ Raspberry Pi, e.g. 24 V or 230 V (depending on the specific M5S I/O module version). Features • 8 sockets for M5S modules • Terminal blocks for external circuit (EXT-S) and external power supply, e.g.
PAGE 12
Pin assignment 4 JP_0V GND 14 13 12 11 10 M5S SmartRelay 9 8 7 10 11 12 A5 13 A4 A3 A2 A1 A0 6 5 4 3 5 2 1 5V 0 Arduino UNO&Leonardo MIO8-Arduino(V2.0) V S S V G G 8 1 9 8 7 6 5 4 3 1 2 8: Power 7: 7 → 3V3 6: - + 8 A0 A1 A2 A3 A4 A5 5: 3 3.3V 5V GND GND Vin 4: 2 JP_V+ 3: 1 I/O 2: (EXT+) External circuit +, connected to all pins 7 of the M5S modules (EXT-S-1..
PAGE 13
Application wiring diagrams (examples) Arduino pins and M5S pins need to be connected by jumpers or jumper cables. 24 V + U 24 V − + − I/O I/O - 11 10 9 9 8 8 0 5V 0 1 0 1 9 2 8 3 10 7 4 11 6 5 12 5 6 13 4 7 A5 3 Arduino UNO&Leonardo MIO8-Arduino(V2.0) G V S S V G A4 3V3 1 Power 2 WWW.ZDAUTO.COM → 8 1 3 9 8 7 6 5 4 1 3 2 A3 4 5V A0 A1 A2 A3 A4 A5 5 3V3 2 6 Arduino UNO&Leonardo MIO8-Arduino(V2.
PAGE 14
MIO-RASPBERRYPI: Raspberry Pi M5S I/O HAT Supports all Raspberry Pi models with a 40-pin GPIO interface, e.g. Pi 1 Model B+, Pi 3 Model B. Pin assignment JP_0V GND 37 JP_V+ 35 33 31 29 27 GND 23 40 8 23 22 1 24 21 MIO-8-RaserryPi(V2.0) For Raspberry Pi 38 37 36 35 33 31 32 27 28 26 29 21 19 3.3V 15 13 11 5V GND 3V3 7 5 5 3 5 8 7 10 12 11 16 13 15 18 19 G 3.
PAGE 15
Application wiring diagrams (examples) Raspberry Pi pins and M5S pins need to be connected by jumpers or jumper cables. 24 V 24 V + − M5S-BOT03750D1b 32 31 33 35 36 37 38 40 11 12 10 7 8 5 3 29 16 27 28 26 5V 8 1 23 22 3V3 24 21 13 15 18 19 3 5 8 7 10 12 11 16 13 15 18 19 JP_0V GND 37 15 13 11 GND 7 5 3 5V JP_V+ 35 33 31 29 27 GND 21 3.3V 19 23 40 22 18 16 12 8 5V GND 8 1 23 10 GND 40 MIO-8-RaserryPi(V2.
PAGE 16
M5S communication modules - „CX“ • These modules can be used to address different communication interfaces. • The communication modules use 2 signal pins per module as opposed to the I/O modules, each using 1 signal pin. • TX/RX wiring on the control side • Optional: isolated or non-isolated signal • RS232, RS422, RS485, USB, LAN, CAN • Not usable with the evaluation boards for Arduino and Raspberry Pi M5S-CX.232.03.E3, M5S-CX.232.05.E3 Description Internal circuit Version RS232 CX.232.
PAGE 17
M5S-CX.485.03.E3, M5S-CX.485.05.E3 Description Internal circuit Version RS485 CX.485.03 communication module CX.485.05 non-isolated External circuit Signal Supply Isolation Signal Supply 0-3.3 V TTL 3.3 V/5 mA DC No 0-5 V TTL 5 V/5 mA DC 5V differential voltage RS485 interface Via internal supply INT-TX INT-RX INT+ INT− DIRECTION EXT− EXT-RXTX− EXT-RXTX+ M5S-CX48505E3 1 2 3 4 5 6 8 7 RS485+ RS485− GND MCU + − U UINT 5V M5S-CX.485.03.E4, M5S-CX.485.05.
PAGE 18
M5S-CX.USB.03.E3, M5S-CX.USB.05.E3 Description Internal circuit Version External circuit Signal USB CX.USB.03 0-3.3 V TTL communication module CX.USB.05 0-5 V TTL non-isolated Supply Isolation Signal Supply 3.3 V/5 mA DC No USB interface Via internal supply 5 V/5 mA DC INT-TX INT-RX INT+ INT− RTS DTR EXT-RXTX − EXT-RXTX+ M5S-CXUSB05E3 1 2 3 4 6 5 7 8 USB D+ USB D− GND 5V MCU + − U UINT 5V M5S-CX.LAN.03.E3, M5S-CX.LAN.05.
PAGE 19
M5S-CX.CAN.03.E3, M5S-CX.CAN.05.E3 Description Internal circuit Version External circuit Signal CAN CX.CAN.03 0-3.3 V TTL communication module CX.CAN.05 0-5 V TTL non-isolated Supply Isolation Signal Supply 3.3 V/5 mA DC No CAN interface Via internal supply 5 V/5 mA DC INT-TX INT-RX INT+ INT− EXT− EXT-RXTX− EXT-RXTX+ M5S-CXCAN05E3 1 2 3 4 5 6 7 8 MCU + − U CAN_HIGH CAN_LOW GND UINT 5V M5S-CX.CAN.03.E4, M5S-CX.CAN.05.
PAGE 20
Contact (Exclusive Sales Europe) TDE Instruments GmbH, Gewerbestraße 8, D-71144 Steinenbronn Telephone: +49 7157 20801 Email: info@tde-instruments.de Web: www.tde-instruments.de, www.modular-io-components.com Rev-2019-08 Page 20 of 20 www.tde-instruments.