User's Manual

Preview
TF Playing:
When the TF card is inserted, the microphone will play TF card
Product Features
1) This device is 100 % compatible with the karaoke app on
Android smartphones, and compatible with mainstream karaoke
App on iPhone.
2) With colorful LED light
3) Four magic sound: magic sound 1, magic sound 2, magic
sound 3 and magic sound 4.
How to use ZealSound k8 karaoke Microphone?
On/Off buon:
Long press the power button to turn the power on, accompanied
with a prompt tone“Power on”, and the blue light blinks. If no TF
card inserted into the microphone, the device will enter into
Bluetooth mode automatically. The microphone is ready for paring.
Bluetooth connecon:
Open Bluetooth on your device, and then you will find “k8” on your
Bluetooth list.
Select and connect. There will be a prompt tone (Bluetooth
connected successfully). Pairing may takes several seconds.
Warm Tip: if Bluetooth can’t connect：
a. Please restart the microphone
b. Move the phone closer.
c. Avoid any obstacles.
d. Check if any other device is paring with k8. If yes, please
unpair previous device.
1. Power Button: Long press to turn on/off the device. Short press
to vocal decrease
2. Mic Volume
3. Echo Adjustment
4. Music Volume
5. Previous
6. Next
7.7. Mode Button: short press to toggle be
.
tween different Mode
Long press to enter into Magic Sound Mode, (On Magic Sound
Mode ) short press to toggle among different sound effect, long
press again exit Magic sound Mode.
8. Play/Pause: (On TF card Mode) Long press to enter loop
play mode
9. Headphone Jack(3.5mm)
10. TF Card Slot
11. Charging/Recording Port
What’s in the Box
1、Bluetooth Karaoke Microphone*1
3、Micro USB Charging Cable*1
USB cableAudio cable
2、3.5mm Audio Cable*1
4、User manual*1
How to Charge it?
Use the included micro USB cable to connect ZealSound k8 to a
computer or adapter. The charging indicator will be on red during
charging, and will shut off when fully charged. It takes about 3
1. Wireless connect:
You can record your voice on Bluetooth Mode via App on your phones.
2. Wired connect:
Please use the 3.5mm audio cable connect with mobile phone
and k8 mic. If your Phone is the Lightning or Type -C ear jack,
please use an adapter cable. (not include)
As the following connect indications:
music automatically.
Only MP3 and WAV audio files are available.
Music Recording:
a.Please do not expose in rain or moisture;
b.Please do not disassemble and repair and retrofit;
c.Please keep and use in normal ambient temperature;
d.Please do not drop, avoid the damages due to falling;
e.Please charging it with microphone rated voltage;
f.Unauthorized disassemble invalidates the warranty;
g.Long time exposure to high volume may hurt your
hearing, please avoid too high volume.
h.Working Temperature: -10°～40°C, Relative
humidity: 10% ～95%RH
Warranty:
We provide one year warranty for the ZealSound k8 Wireless
Bluetooth Microphone. This warranty will become void if the
equipment is altered, misused, mishandled, maladjusted or
suffers excessive wear.If you have more questions, please
do not hesitate to contact our after-sale customer service via
email [e-mail].
hours to fully charge .
Problem
Cannot turn the power on
No Sound or recorded
No Echo sound
Noise while singing
Poor sound quality
from the microphone
sound is too low
The device may be out of power.
Try it again after charging for 3 hours.
a. Check the volume setting of your
microphone, phone or computer.
b. Make sure the microphone is fully
charged, especially when you use
it for the first time.
Check if Bluetooth connection distance
is beyond of range or any barriers
between k8 and mobile phone.
a. Check if it caused by poor contact.
Unplug and plug the audio cable again.
b. Try with another phone to test if it is
caused by incompatibility.
Push the Echo button to adjust the
reverberation effect.
Solutions
FAQ:
Technical Specificaon:
Precauons:
Bluetooth accompaniment
music is too low or no sound
Bluetooth can't connect
Bluetooth music play is
distorted
Bluetooth was connected,
External connector
MICRO USB, 3.5 mm Earphone,
TF Connector
Size: 9.25*2*1.2 inches
5W
3.7v
4.1
57mm
Frequency Range
Reverberation
Power equipment
Battery specifications
Charging time
2600 mAh replaceable battery
About 3 hours
120Hz-13KHz
Echo sound reverb
DC 5V / 1000mAh (Can be used
with partial Android mobile phone
charge cable)
Unidirectional back-mounted capacitive
microphone ± 48Db
Product Dimension
Maximum output
Operating Voltage
Bluetooth version
Horn diameter
Pickup
but no sound
Adjust the volume of the music APP
of the phone.
a. Please restart the microphone
b. Move the phone closer.
c. Avoid any obstacles.
d. Check if any other device has
connected with k8. If yes, please
disconnect the previous.
a. Low battery, please charge
b. Check if vocal decrease mode is
on( Short press power button)
a. Adjust Music button on k8 mic
b. Check the volume on your mobile
phone
c. Change other music player
Warning:
Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE
：
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE：
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure
requirement
Warranty certificate
Client’s name :
Contact number :
Username :
Correspondence address:
Email address:
Product information :
User manual