User's Manual
Table Of Contents
- Important Notice
- Introduction
- Programming Guide
- Connecting to a Host
- System Function Settings
- Scan Mode
- Radio Communication Setting
- Operation Function Setting
- Interface Settings
- The Symbologies
- Codabar Parameter Setting
- Code 39 Parameter Setting
- Code 93 Parameter Setting
- Code 128 Parameter Setting
- Chinese Post Code Parameter Setting
- MSI/Plessy Parameter Setting
- Code 11 Interface Setting
- ITF 2 of 5 Parameter Setting
- Standard 2 of 5 Parameter Setting
- Industrial 2 of 5 Parameter Setting
- UPC/EAN/JAN Parameter Setting
- Telepen Parameter Setting
- Matrix 2 of 5 Parameter Setting
- Data Editing
- Appendix 1: USB Virtual COM Driver Installation
- Appendix 2: Barcode Length Setting
USER’S MANUAL
Handy Wireless Scanner
8
Scanner USB online to Host
The scanner provides other ways for you to connect to the host. When the
radio communication is not available, the scanner can be connected to transmit data via
USB Online mode. Please see USB Online Mode for detail operation information.
USB Online Mode
The scanner connects directly to a USB host to recharge and transmit data.
Visible Indicators
Scanner LED
Please see the following for the operational indication of the scanner.
LED Status Indication
Blue flashing Waiting for radio connection (flash time
0.5s : 0.5s).
Blue fast flashing Radio connecting.
Blue slow flashing Device connected (flash time 0.03s : 3s).
Blue flash once A barcode was decoded successfully
Blue fast flashing Data transmission
Green flashing Charging mode
Steady green Battery fully charged
Steady red Programming mode
Red flashing slow (with
continuous beep sound)
Low battery warning
Red flash twice (with 2 beep
sound)
Very low battery warning