User's Manual
Table Of Contents
- Important Notice
- Programming Guide
- Connecting to a Host
- System Function Settings
- Scan Mode
- Radio Communication Setting
- Operation Function Setting
- Interface Settings
- The Symbologies
- Codabar Parameter Setting
- Code 39 Parameter Setting
- Code 93 Parameter Setting
- Code 128 Parameter Setting
- Chinese Post Code Parameter Setting
- MSI/Plessy Parameter Setting
- Code 11 Interface Setting
- ITF 2 of 5 Parameter Setting
- Standard 2 of 5 Parameter Setting
- Industrial 2 of 5 Parameter Setting
- UPC/EAN/JAN Parameter Setting
- Telepen Parameter Setting
- Matrix 2 of 5 Parameter Setting
- Data Editing
- Appendix 1: USB Virtual COM Driver Installation
- Appendix 2: Barcode Length Setting
Di Bar Watch
1
USER’S MANUAL
Visible Indicators
Definition for LED function
LED1
BLUE/ORANGE
BT Connected Stable Blue
BT Try to or Wait for connect Slow blink Blue
BT Transmitting data Fast Blink Blue
BT Disconnected Turn OFF Blue (w/ indication Beep)
Working in Memory Mode Slow blink Orange
Memory nearly FULL(80% FULL) Fast blink Orange
Memory FULL Stable Orange(w/Caution Beep)
LED2
RED/GREEN
Power ON Stable RED
Good Read Blink once Green w/Beep
Battery Low (<30%) Slow Blink Red
Battery Very Low (<15%) Fast Blink Red
Battery Very Low (<5%) Fast Blink Red(w/ Caution Beep)
Definition for Key function
Trigger Key
1. Press long period : Power ON
2. Press/Click : Trigger to read barcode when working
F1
1. Click : Software keyboard ON/OFF for iOS/Android
2. Press long period : Toggle Memory mode ON/OFF
F2 Press long period : Send memory data when working in
memory mode
Combination keys Trigger +F1(Press long period) : Delete last record in memory
mode
Trigger +F2(Press long period) : Delete all recodes in memory
mode
F1+F2(Press long period) : Disconnect BT pairing
F1+F2+Trigger (Press long period) : Power Off
(*)Press long period = 4 sec