User's Manual
Table Of Contents
- Important Notice
- Programming Guide
- Connecting to a Host
- System Function Settings
- Scan Mode
- Radio Communication Setting
- Operation Function Setting
- Interface Settings
- The Symbologies
- Codabar Parameter Setting
- Code 39 Parameter Setting
- Code 93 Parameter Setting
- Code 128 Parameter Setting
- Chinese Post Code Parameter Setting
- MSI/Plessy Parameter Setting
- Code 11 Interface Setting
- ITF 2 of 5 Parameter Setting
- Standard 2 of 5 Parameter Setting
- Industrial 2 of 5 Parameter Setting
- UPC/EAN/JAN Parameter Setting
- Telepen Parameter Setting
- Matrix 2 of 5 Parameter Setting
- Data Editing
- Appendix 1: USB Virtual COM Driver Installation
- Appendix 2: Barcode Length Setting
USER’S MANUAL
Di Bar Watch
15
9. A message should appear in the Windows Taskbar telling you a Bluetooth
device is attempting to connect. Click on the message to open Add Bluetooth
Device Wizard.
10. Enter the pin code in the Add Bluetooth Device Wizard and click “Next”. The
default pin code is “12345678.
11. 13. Click “Ok” when the connection is established.
12. Open HyperTerminal or other serial port programs and select the COM port
you wrote down in the previous step and click “OK”.
Remark: You do not wish to proceed via HyperTerminal, you can use serial
port program by clicking icon -> [
]
13. Select the telephone icon to open the COM port.