User's Manual

11
Uploading Data to a PC
The PDC can communicate data to a PC using
either WinTaskGen, the supplied software interface,
or another RS-232 / USB communications interface,
such as HyperTerminal, which comes with
Windows.
Communications settings are:
- baud rate: 9600 bps
- data bits: 8
- parity: none
- stop bits: 1
- flow control: none
To upload data:
1. If not on already, turn on the computer.
2. Connect the PDC with a PC COM port using the
supplied communication cable.
Figure 7: Communication Cable
To COM port
on the PC
To COM
p
ort on PC