User's Manual

19
when selected and scan pressed, deletes
whatever character is selected in the left, or edit,
field. You can use the backspace to delete a row
of digits by pressing scan repeatedly.
The v character, when selected and scan
pressed acts as <escape> to the next menu.
3. Press scan to delete the target digit. The digit is
deleted and its now-blank position is selected.
To move the selector one position to the left,
press s again. The digit in the next position to
the left is selected.
4. To write (or overwrite) a digit, position left
selector in the required position (by deleting and
writing digits), then use the v and ^ keys to
select the desired new digit from the right-hand
menu.
5. Press the scan key to enter. The digit appears
on the left in the previously selected position
and the cursor advances right to the next
position (except when writing the rightmost digit,
in which case the cursor stays there).
6. When MMDDYY is set, press the f key to jump
to HHMMSS setup. Following 24 hour format,
the procedure is similar to setting MMDDYY.
7. When finished, press the FN key to escape.