User's Manual

1.5. Bluetooth® Communication (Optional)

The PDC supports to connect with a Bluetooth® radio device via

Serial Protocol Profile (SPP). It works like virtual serial cable once

connection pair between two devices is established.

Please make sure the Bluetooth® function is finely equipped on

the host device, as well as an application program is installed. If

an optional Bluetooth USB dongle is purchased, please refer to a

separate product manual on website for IVT software instruction.

For further enquiries, please contact your dealer.

1.5.1. Connection Mode:

Before establish a Bluetooth® connection between two devices, it

is necessary to define which device to be the “Master” during the

communication. The “Master” device holds the initiative to

connect or disconnect the “Slave” device. The “Slave” device

waits for the command from “Master” when it’s power on.

1.5.2. Bluetooth Device Address:

Each Bluetooth® device has a unique hex number with 12 digits

to identify itself during communication, as so called Bluetooth

Device (BD) address. It is essential to set up a target BD address

before making a pairing of SPP connection.

1.5.3. Personal Identify Number code:

A Personal Identify Number (PIN) code is used as a validation

password.

1.5.4. Pairing PDC as SPP Master:

When a pairing process is initiated by PDC, PDC is known as SPP