User's Manual

28 - System Reset
Using the Warm Reset Function
Warm reset allows you to reset the scanner without wiping any config-
uration data or files.
To use warm reset:
1. Remove the black cap on the stylus to reveal the needle.
2. Insert the needle into the reset hole, between the power and
backlight buttons.
3. Press down gently.
The machine will reset itself. Proceed with the screen calibration pro-
cess as explained in “Turning on for the First Time” on page 17.
NOTE
Following a cold or warm reset, you will be asked whether you want
to format the Z-2050’s flash disk or not. Formatting the disk will
erase ALL data.