ZEBEX INDUSTRIES INC. 1.3 Click ” … ” bottom to select the file need to be transferred, then click ” OK ” bottom to confirm. ʳ 1.4 Select “ Start Transfer ” bottom to start file transferring . Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Preload Manager The Preload Manager is an auto execution program for ZEBEX’s WinCE device. You may set programs into the Preload list box and running the program by automatically or manually. 1. Modify Window located on top of display, providing functionalities of Priority, Remove and Browse. 2. Priority : Providing “UP ”and “DOWN ” two bottoms for adjusting priority on the lists. 1. Edit : Providing ”Remove “ ፖ “Browse..
ZEBEX INDUSTRIES INC. Preload Operation 1. Selected Program; 1.1 By clicking ”Browse..”ǴCfmpx!nfov!xjmm!bqqfbs-!tfmfdu!qsfmpbe! qsphsbn!cz!vtjoh!gpmefs/!Qsphsbnt!dbo!cf!tfmfdufe!npsf!uibo!podf/!! !!! Confirming file by clicking “OK” will get back to Preload Manager main page. Then complete its process. ʳ Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. 2. Reset preload priority; If the preload priority need to be set up as belowǺ! !!!!!!(1)play music -> (2)open explorer -> (3)check everything Follow steps listed below : 2.1 Select by clicking play music.exe program and click” Up ” bottom, Therefore, play music.exe will be shifted up. 2.2 Then select by clicking check everything program and click “Down” bottom. Therefo re, check everything program will be shifted down. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. 3. Remove a program: In order to remove “open explorer” program, select by clicking program, then select “Remove” by clicking on bottom to finish command. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Switch The WiFi & Bluetooth switch utility. This application provides as a switch function to let you easy turn on or off the function and power for WiFi and Bluetooth interface. The available wireless network access point will be searching automatically when you check the selection for enable WiFi function. You can select an access point and press “ ” button to connect with that network. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Double-click the “ ” on the list box will add a new wireless network, or double-click an existed access point on the list box for open the wireless properties for setting. You also can use " " or " " button for display more information for network setting. ʳ Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. TrayScan The TrayScan program is a barcode reader set up program, it offer you an easy way to enable or disable the barcode scanner, and also offer you to set up each barcode symbolic properties. . Below are instru ction s of functions on main page: 1. Output Mode Providing three output methods such as Copy & Paste / Key Emulation / None (Copy to Clipboard). Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. 1.1 Copy & Paste Copy and paste the barcode information into application that need to execute data as input. (ex. WordPad*Ǵ! 1.2 Key Emulation Transfer barcode information via Key Emulation to executed software’ s edit window. Key Emulation function can also be used for barcode scanning under conditions of Terminal Emulation, Command Promp and some other program without touch panel. Read data will be transferred to application program. 1.
ZEBEX INDUSTRIES INC. To check the barcode type selection for enable the type of barcode for read. Press " barcode. " button to setting the barcode parameter value of each kind of Press " "button to use system default value to set up the barcode parameter. The default value was show in below pictures. Subject Z-2065 series User’s Manual Version 3.
