Handheld Computer Z-2065 series User’s Manual ( Version 3.00 ) RESET SCAN ENT ENT ESC BS F1 1 abc 2 def 3 ghi 5mno 6 pqr 8vwx 9y z F2 4 jkl 7 stu F3 F4 0@ SP ZEBEX INDUSTRIES INC. WWW.ZEBEX.
ZEBEX INDUSTRIES INC. Editorial Record Version Date of edited Page Ver 2.00 2009/3/2 9 Revise the picture of Package contents Ver 2.00 2009/3/2 10 Revise the picture of Cradle Package Ver 2.00 2009/3/2 11,12 Revise the picture Purchaseable accessories Ver 2.00 2009/3/2 26~52 Adding the instruction of Using PowerPack Ver 2.00 2009/3/2 53~56 Adding the picture of How to order Ver 3.00 2010/1/25 26~49 Updated PowerPack Functions and pictures Ver 3.
ZEBEX INDUSTRIES INC. Table of Contents Preface About This Manual .......................................................................................................... 5 Symbols used in this manual .............................................................................. 5 Copyright ........................................................................................................................... 6 Safety Information ........................................................................
ZEBEX INDUSTRIES INC. Connect to GPRS Service............................................................................................37 Disconnect GPRS Service ...........................................................................................39 Using Zebex Power Pack Backlight ..........................................................................................................................40 Calculator....................................................................................
ZEBEX INDUSTRIES INC. Preface About This Manual Thank you for your purchase of the ZEBEX Z-2065 series handheld computer. ZEBEX Z-2065 series product is at the forefront of handheld computer technology, and this manua l will provide the necessary information on the many and varied options available to you. The Z-2065 series product is a compact, ergonomic and durable handheld computer. It is designed with an integrated 802.
ZEBEX INDUSTRIES INC. Copyright ZEBEX Industries Inc. makes no warranty of any kind with regard to this material. Including but not limited to the imply warranties of merchantability and fitness for a particular purpose. ZEBEX Industries Inc. shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, Performance or use of this product. ZEBEX Industries Inc.
ZEBEX INDUSTRIES INC. Safety Operation WARNING Disassembly and Modification Never try to disassemble or modify the device in any way. All servicing should be carried out by qualified Zebex pers onnel or Zebex - appr ov ed e ngi neers . Interior Parts and Components Never touch interior high voltage parts or components. Doing so creates the danger of electrical shock. Drop and Knock the Device Be careful when using the device; do not drop or knock the device as irreversible damage to the unit may occur.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and by the Canadian regulatory authorities is 1.6 W/kg.
ZEBEX INDUSTRIES INC. Unpacking Package Contents AC Adapter Z-2065 series Mobile Data Terminal Stylus Pen RS-232 DB9 (F) Cable Hand Strip Battery Pack Hand strip Holder Subject Z-2065 series User’s Manual Sling for stylus Pen Version 3.
ZEBEX INDUSTRIES INC. Optional Parts Cradle package Docking Cradle RS232 cable AC Adapter Subject Z-2065 series User’s Manual USB cable (Cradle to USB) Version 3.
ZEBEX INDUSTRIES INC. Purchaseable Accessories RS232 Cable AC Adapter RS-232 DB9 (F) Cable USB cable (Cradle to USB) U.S. Plug head Australia Plug head Battery Pack Europe Plug head Stylus Pen Subject Z-2065 series User’s Manual Britain Plug head Version 3.
ZEBEX INDUSTRIES INC. Hand Strip for stylus Pen Sling for stylus Pen Hand strip Holder Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. General Guide RESET SCAN ENT ESC ENT BS 1abc F1 2def 3ghi 4jkl F2 5mno 6pqr 8vwx 9y z F3 7stu 0@ F4 SP 1 LED indicator Indicates the status of read bar code or battery charge : Green for successful read barcode or full charge of battery. Red for battery just on charging. 2 Buzzer Outputs operation confirmation tones. 3 LED indicator for WI-FI Flashes in red when operating via WLAN communication 4 LCD screen Display various data when a program is being run.
ZEBEX INDUSTRIES INC. RESET SCAN ENT ENT ESC BS 1 abc F1 2 def 3 ghi 5 mno 6 pqr 4 jkl F2 7 stu F3 8 vwx 9 yz F4 0@ SP Arrow Arrow keys Pres s thes e to mov e arou nd the screen. ENT Enter key Press to confi r m entries or c ommands. 0-9 Al phan umeric k ey pad Press to enter numerical or alphabetical data. F1-F4 Func ti on k ey s Press to ac cess function keys 1-4. BS B ac ks pac e k ey Press to move cursor and deletes the previous character each time.
ZEBEX INDUSTRIES INC. Getting Started Inserting the Battery Insert the battery pack as shown and watch the battery direction.. Remove the Battery Push the side lock to pick up the battery pack. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Charging the Battery The Li-ion rechargeable battery can be charged while inserted in the device itself or independently via the recharging slot at the back of the cradle. Charging by cable Connect the charging cable and AC adaptor as shown. Charging by cradle AC Power Adapter Jack In USB Interface RS232/COM port Interface Cradle - rear view Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Left LED Right LED Cradle - front view Cradle LEDs Left LED - The LED lit when a battery is inserted into the rear battery slot of the cradle for recharge. It remains lit until the charge is complete. Right LED - The LED lit when the cradle is connected to AC power. Charging the battery separately in the cradle Insert the battery into the compartment at the rear of the cradle. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Connect the power jack to the cradle and plug AC adapter into the socket. NOTES Whe n c hargi ng the battery for the fi rs t time, charge for at l eas t 12 ho urs pri or to use. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. System Reset Using the Warm reset function Warm reset function allows you to return the device to the default settings, wile not wiping all data from the memory. Insert the needle into the reset hole as shown and press down gently, to reset the device.
ZEBEX INDUSTRIES INC. PC System Requirements Windows XP Operating System 64 MB RAM 50 MB free HDD space Interface : USB / RS-232 ports WLAN transmitter (optional) Bluetooth transmitter/receiver (optional) Connecting To a PC In order to use the software supplied with the Z-2065, the mobile data terminal must be connected to a PC. Connecting via the RS232 In order for the sync software to work properly, the cradle must be connected to your computer’s COM port.
ZEBEX INDUSTRIES INC. Connecting via USB Cradle The cradle must also be connected via one of your PC’s USB ports. Attach one end of the cable to the USB interface on the cradle and the other to your PC. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Inserting SD Card 1. Make sure the power is turn off. 2. Open the SD Slot cover as shown, Insert the SD card. 3. Close the SD slot Cover. Remove the SD Card 1. Make sure the power is turn off. 2. Open the SD Slot cover as shown, Take off the SD card. 3. Closed the SD slot cover. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. About The Product ZEBEX Z-2065 WinCE.NET Handheld Computer comes with the one and only Jacket-module design, and makes most user friendly features to select as desired. The Jacket-module is a module at the back of device that is selectable in GPRS, GPS, RFID, WLAN or Bluetooth communications and 1D or 2D scanning engine, it satisfies all application from indoor to outdoor and from warehouse to transportation logistics.
ZEBEX INDUSTRIES INC. Available models and the features: %DUFRGH :/$1 0RGHO 3 1 LQFOXGH DFFHVVRU\ 3 1 GHYLFH RQO\ ' %7 :/ Ⴗ = :/ : : : : : *6 : *6 : *6 : *6 * 6+ * 6+ = :/ Ⴗ = : *6 Ⴗ * 6+ * 6+ : * : * : * : * : 6 : 6 : 6 : 6 Ⴗ = : *
ZEBEX INDUSTRIES INC. Weight Environmental A ppr ox. 480 g (battery included) O p e r ating Te m p . -30°C ~ 5 5 °C Storage Te mp Operating Hu mi dity Storage Hu midity -10°C ~ 60°C 10% ~ 70% (non-c on den s i ng) 5% ~ 70% (non-c ond ensing) Drop Durability Environmental Sealing Reg ulatory A pproval s Cradl e Withstand 1.2m ( 4 feet) drop to concrete IP64 rated sealing CE & FCC Part 15B, 15 C ,CE RF,LVD,ESD Single slot USB / RS-232 charging cradle with spare battery slot Mi crosoft V C 6.
ZEBEX INDUSTRIES INC. Using RFID Scanner (Optional) Scanning RFID To open Zebex RFID demo program, you can find program located on following path: “My Device\Flash Disk\RFID\RFID_ADJ\”. RFID Scanning Position RFID scan module was installed in the back of terminals. The devices can read from 30 to 50mm distance from the back-side of terminals. To scan a RFID After opening Zebex RFID demo program, you will see main menu displayed as below.
ZEBEX INDUSTRIES INC. 15693”, and “RW Mifare”. Please follow below steps to read UID. Reading UID 1) Select COM port to reading UID, default setting was COM5. Then confirm by pressing “ Open Port ” button. 2) Select UID type, then confirm by pressing “ Start ” button. Demo program provide three UID types such as 15693, 14443A, and 14443B. 3) User can also adjust scanning rate by selecting how many msec for scanning once. Then confirm by clicking “ Timer ” button.
ZEBEX INDUSTRIES INC. data by pressing “ Write Block ” button. 4) Information appear at bottom can be clear by pressing “ Clear ” button. RW Mifare On RW 15693 function window, user can read and write information from Mifare UID card: 1) Place UID card within valid range, check UID by pressing “ Open Card ” button. UID will display in red circle shown in below diagram. 2) To perform read and write commands, please refer to “RW 15693” sections. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. ZEBEX Hand-Held Terminal GPRS User’s Guide Make New Connection 1. Click Network and Dial-Up Connections in the settings . Show as below figures. 2. Click Make New Connection to create the new connection. Show as below figures. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. 3. Select the Dial-Up Connection and press Next button to make new connection. Show as below figure. 4. Press Next button to select the modem. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Set Connection Properties 1. Select Internal GPRS Modem and press the Configure button to change the settings of properties. 2. Change the Baud Rate to 115200 in Port Settings. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Show as below figure. 3. Input the dial string in Call Option. Show as below figure. Input +CGDCONT=1,”IP”,”APN” to set the APN for GPRS connection. For the setting of known APN around the work, please refer below link: http://www.quickim.com/support/gprs-settings.html 4. Press OK button to complete the settings. 5. Press Next button to set the phone number Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Phone Number 1. Set phone number to *99# or *99***1#. This number depends on the service provider. Show as below figure. 2. Press Finish button to finish the settings of new connection. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Set Dial Properties 1. Double Click the connection. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. 2. Press the Dial Properties button. 3. Create new one or select one setting in the Location and press the Edit button. 4. Set the Dialing Patterns as below figure. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Connect to GPRS Service 1. Press the Connect button. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. 2. During the Dial-Up. It shows the status as below figure. 3. It shows below figure when connected to GPRS service. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Disconnect GPRS Service 1. Double click the connection icon in taskbar. 2. Press the Disconnect button. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. Using the Zebex PowerPack To save your time and effort in developing applications on Z-2070, ZEBEX provides it’s owndesign system management tool to called “PowerPack” to let you control it directly. The PowerPack management tools which installs in each of our WinCE product. It is free charge for you. We offer several function for let you control your device without any programming. Backlight This application is set up the Backlight of LCD Panel and Key pad.
ZEBEX INDUSTRIES INC. Subject Z-2065 series User’s Manual Version 3.
ZEBEX INDUSTRIES INC. 1. LCD The LCD backlight setting. Auto Mode: This function can be set up the LCD backlight to be auto off as Device hasn’t been activated for certain interval. You can set up the Auto off time from 15 sec to 15 min. Always ON: This function can set up the backlight to be always on Until the system into suspend mode. Always OFF: This function can set up the backlight to be always off. 2. Keypad The Keypad Backlight setting.
ZEBEX INDUSTRIES INC. Calculator This calculator function allows operators to add, subtract, multiply, and divide that simply provide basic logistic function in our daily basis. ! The upper zone of the display area displays the memory content, and the lower zone is key pad. Button description: MC MR MS M+ CE C +/0~9 / Ϡ Ё Ѐ Ј : Clear buffer of memory. : Got the value of buffer. : Storage the value to buffer. : Append the value to the buffer.
ZEBEX INDUSTRIES INC. File Transfer File Transfer is a simple file transferring function tool, the tool can transfer file to another devices via blue tooth. Communication agreement of file transferring was adopted with OBEX agreement which shared with cell phone or Notebook PC. So you can simply use this function to transfer file to cell phone or Notebook PC, or doing file transferring between two terminals.
ZEBEX INDUSTRIES INC. Fy/ Gjmf Usbotgfssfe Pqfsbujpo Cz Vtjoh Cmvfuppui 1. File Transferring by using Bluetooth: Make sure Bluetooth devices was activated, Bluetooth Communication devices can be activated under Switch Function within PowerPack software utilities. 1.1 Select “Query “ for searching Bluetooth devices, below window will pop up on display. 1.
