User's Manual

ZEBEX INDUSTRIES INC.

Subject Version DatePage
Z-2170 series User’s Manual 1.00 2011/3/10 8 / 49
Federal Communication Commission (FCC)
Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including
interference that may cause undesired operation
RF exposure warning: The equipment complies with RF exposure
limits set forth for an uncontrolled
environment. The antenna(s) used for this transmitter must not be
co-located or operating in conjunction
with any other antenna or transmitter.
You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void
your authority to operate the equipment.
CE Certification
This indicates compliance with the R&TTE Directive 1999/5/EC
and meets the relevant parts of following technical specifitions:
ETSI EN 300 328 V1.7.1: 2006, ETSI EN301489-17 V2.1.1: 2009
ETSI EN301489-1 V1.8.1: 2008,EN55022:2006+A1:2007
EN55024:1998+A1:2001+A2:2003,
EN60950-1:2006 / A11:2009 / A1:2010 / A12:2011 and/or
IEC60950-1:2005(2nd Edition) / A1:2009
EN 62311: 2008
This equipment complies with CE RF radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.