User's Manual

Select “P2”

Remap Key choose “Barcode Scan”
5. The red laser aiming pattern turns on to assist in aiming, scan ready when beep
sounds.
6. Release the scan button.
 Scan a Bar Code with Camera
Using the rear camera to scan bar code.
1. Launch a bar code reading application or use Data Wedge.
2. Point the back of the Z-2242 / Z-2240 at the bar code.
3. Press the scan button
Photo & Videos
Using the rear camera to take photos and capture video.
Note: Ensure device memory or extend Micro SD card is space is available.
(P2)
Scan Key(P1)