User manual
ZEBEX INDUSTRIES INC.
Scan Manager
The Scan Manager program is a barcode reader set up program, it offers you an easy
way to enable or disable the barcode scanner, and also offer you to set up each
barcode symbolic properties.
Below are instructions of functions on main page:
Output Mode: provides three output methods such as Copy & Paste / Key Emulation /
None (Copy to Clipboard).
Copy & Paste: Copy and paste the barcode information into application that
need to execute data as input. (ex. WordPad)
Key Emulation: Transfer barcode information via Key Emulation to executed
software’s edit window. Key Emulation function can also be used for barcode
scanning under conditions of Terminal Emulation, Command Prompt and some
other program without touch panel. Read data will be transferred to application
program.
None(copy to clipboard): Function provide required barcode information to
application program, after this function was activated, scanner will read barcode
information and save data into clipboard.
Subject Version DatePage
Z-2065 series User’s Manual 4.00 2014/9/19 58 / 70