User`s manual

ZEBEX INDUSTRIES INC.
Start to operate the Z-2121
Scanning Data
1. Insert a fully charged battery.
2. Press the “Power” key. After the display appears, press “M2” key to enter the
System Menu.
3. Then Press “1” to enter the “Run Task” menu.
4. Press “SCAN” to do barcode scanning and data collecting.
System Menu
Below steps show how to access system menu to make various system
configurations such as communication profile and data/time format.
Press the “Power” key. Fig 1 appears showing the firmware version, memory status,
and the date and time. Press M2 to go to the System Menu as shown in Fig 2.

Subject Version DatePage
Z-2121 series User’s Manual 4.00 2012/7/20 23 / 50
Fig 1 Fig 2
In Fig 2 System Menu is shown:
 Press １ enter into Run Task function.
 Press ２ enter into Task Utility function.
 Press ３ enter into Setup function.
 Press ４ enter into Upload function.