User`s manual
ZEBEX INDUSTRIES INC.
In Fig 10 prompt is shown. Enter the message for the prompt. After
confirmed press Ｅ to enter into Fig 11.
ulcp
In Fig 11 field editing is shown. See the chart below to enter nda
to set the format. After confirmed press Ｅ to enter into Fig 12.
r to set the delay. After
In Fig 12 delay is shown. Enter the numbe
confirmed press Ｅ to enter into Fig 13.
In Fig 13 time stamp is shown. Press or to adjust None, Short,
Long. After confirmed press Ｅ to exit.
elete Data Function
ks that are stored in
the device h build-in freetask and custom procedure task.
Fig 14
D
This gives you the option to delete scanned data from ANY tas
; bot
In Fig 14 press M2 to select YES or NO for deleting data
downloaded from PC. After confirmed press Ｅ to leave the
screen.
elete Task Function
to the device.
You are not able to remove the build-in freetask using this function.
D
This allows you to delete any custom procedure task that was transfer
Fig 15
In Fig 15 press M2 to select YES or NO for deleting task downloaded from
PC. After confirmed press Ｅ to leave the screen.
Subject Version DatePage
Z-2121 series User’s Manual 4.00 2012/7/20 27 / 50