User`s manual

ZEBEX INDUSTRIES INC.
Setup Menu
This is where you change the system configurations. Configurations are
categorized into Basic, System, and Barcode.
Fig 16
In Fig 16 Setup Menu shown:
 Press １ enter into Basic Setup function.
 Press ２ enter into System Setup function.
 Press ３ enter into Barcode Setup function.
Basic Setup Function
Here you can set some of the basic device settings such as BackLit & LCD, Beep &
Vibrator, and Auto Power Off).
Fig 17
In Fig 17 Basic Setup is shown:
 Press １ enter into Back Light & LCD setting
 Press ２ enter into Beep and Vibrator setting
 Press ３ enter into Auto Power off setting

Subject Version DatePage
Z-2121 series User’s Manual 4.00 2012/7/20 28 / 50