User`s manual
ZEBEX INDUSTRIES INC.
Beep Volume Function
This allows you to change the system beep volume. Options are: Loud,
Medium, Low, and Quiet (mute).
Fig 20
In Fig 20 Beep Volume is shown with the default set to Loud. Press
or to adjust Quite, Low or Medium, after confirmed press Ｅ to leave
the screen.
Vibrator Function
Here you can switch on/off the vibrator when a successfully scan is
registered.
Fig 20-1
In Fig 20-1 Vibrator can be turn ON/OFF.
Press or to set On or Off. After confirmed press Ｅ to leave the
screen.
Subject Version DatePage
Z-2121 series User’s Manual 4.00 2012/7/20 30 / 50