User`s manual

ZEBEX INDUSTRIES INC.
Communication Function
Here you can change the communication parameter. This will be the
communication method use to communicate with external devices
such as host PCs.
Fig 23
In Fig 23 is shown for System Setup function, the following is the
description of each function:
 Press １ enter into Comm. Parameter.
 Press ２ enter into OnLine Upload.
 Press ３ enter into Timeout Value.
Comm. Parameter Function
Here you can change the communication profile of the device. Depend
on the environment; you can set it as RS232, USB, and BT (Bluetooth).
Fig 23-1
In Fig 23-1, you can adjust communication profile for the device.
Press or to adjust RS232, USB, BT. After confirmed press Ｅ to leave
the screen.

Subject Version DatePage
Z-2121 series User’s Manual 4.00 2012/7/20 32 / 50