User`s manual

ZEBEX INDUSTRIES INC.
RS232
Here you can configure the device to use RS-232 as communication
profile. Under most condition, you should accept the default settings.
Fig 24 Fig 25
Fig 26 Fig 27
In Fig 24 Baud Rate is shown for speed setup. Press or to adjust
115200, 57600, 38400, 19200, 9600, 4800, 2400 or 1200, after confirmed
press Ｅ to enter into Fig 25.
In Fig 25 Parity Check is shown. Press
or to adjust even, odd, mark
or space. After confirmed press Ｅ to enter into Fig 26.
In Fig 26 data bit setup is shown. After confirmed press Ｅ to enter into
Fig 27.
In Fig 27 you can setup stop data bit, after confirmed press Ｅ then press
M1 to exit.

Subject Version DatePage
Z-2121 series User’s Manual 4.00 2012/7/20 33 / 50