User`s manual

ZEBEX INDUSTRIES INC.

USB

Set the device to use USB as communication profile.

Fig 27-1

In Fig 27-1, you can set the communication profile to USB

Press Ｅ to confirm and leave the screen.

Set the device to use Bluetooth communication profile. After selecting

BT, you will be prompt to start the initial paring process using SPP

connection. You can start the pairing process under either Master or

Slave mode.

Fig 27-2 Fig 27-3

In Fig 27-2, you can set the communication profile to Bluetooth

Press Ｅ to confirm and continue with BT (SPP) setting

In Fig 27.2, you can adjust the SPP Bluetooth paring Mode.

Press or to adjust Master Mode or Slave Mode. After confirmed press

Ｅ to continue.



Subject Version DatePage

Z-2121 series User’s Manual 4.00 2012/7/20 34 / 50