User`s manual
ZEBEX INDUSTRIES INC.
Timeout Value Function
Here you can specify the waited time before host device respond with
“Communication error” error message when using WinTaskGen. You
DO NOT need to make any modification of this function unless you are
instructed to do so.
Fig 31
In Fig 31 you can set up the Timoeout Value. Press or to adjust 10
Times, 20 Times, 50 Times, 100 Times, or Normal. After confirmed press
Ｅ to exit.
Subject Version DatePage
Z-2121 series User’s Manual 4.00 2012/7/20 38 / 50