User`s manual

ZEBEX INDUSTRIES INC.
Device ID Function
Here you can change the Device ID of your data terminal. This Device ID
is NOT the same as Bluetooth device ID when connecting to host device
via Bluetooth communication profile. It is to be use only with
WinTaskGen to distinguish between data terminals if you have multiple
terminals connected to the same host device.
Fig 35 Fig 36
In Fig 35 is shown to set up the Device ID, after confirmed press Ｅ to enter
into Fig 36, and press the number, after confirmed press Ｅ to leave the
screen.
Password Function
Here you can setup a password to prevent unauthorized access to Setup
Menu. Once the enable, user will be prompt to enter the correct
password before accessing the Setup Menu and deleting any data/task
from the terminal as a form of protection and user access control.
Fig 37 Fig 38
In Fig 37 is shown to set up password, after setup press Ｅ to leave the
screen, If there is no setting will enter into Fig 38 automatically, please press
Ｅ to leave the screen.

Subject Version DatePage
Z-2121 series User’s Manual 4.00 2012/7/20 40 / 50