User`s manual

ZEBEX INDUSTRIES INC.
Date Mode Function
Here you can set the format of system date accordingly.
Fig 39
In Fig 39 is shown to set Date Mode. Press
or to adjust MM/DD/YY,
DD/MM/YY, or MM/DD/YYYY. After setup press Ｅ to leave the screen.
Barcode Setup Function
Here you can adjust the barcode decoding configuration. Unless you are
experiencing scanning issues, modification to this section should be performed by
your solution provider / system integrator.
Fig 40
In Fig 40 is shown for Barcode Setup function, the following is the
description of each function:
 Press １ enter into Basic Set function test.
 Press ２ enter into Advance Set function test.
 Press ３ enter into Pre/Postamble function test.

Subject Version DatePage
Z-2121 series User’s Manual 4.00 2012/7/20 41 / 50